Studer VarioString VS-120
Picture similar to product
Product number:
30404005
Product information "Studer VarioString VS-120"
Studer VarioString VS-120
The VarioString responds to the toughest requirements in efficiency in solar installations. It also reduces the system costs by accepting PV strings up to 600 or 900Vdc. This allows for a more simple installation and reduces the installation time and material costs: reduction in cable cross-section and length, absence of junction box and string fuses. The two isolated MPPT inputs allow for the integration of PV strings with different electrical characteristics and orientations. The reinforced isolation between the PV modules and the battery allows for any combination of grounding schemes and an optimised system security.
| VS-120-80 | MPPT 1 | MPPT 2 | 1 + 2 in parallel | 1 + 2 in serie |
| Max. solar power | 3500 W | 3500 W | 7000 W | 7000 W |
| Max. current | 13 A | 13 A | 26 A | 13 A |
| Max. open Circuit Voltage | 600 Vdc | 600 Vdc | 600 Vdc | 900 Vdc |
| Min. functional voltage | 200 Vdc | 200 Vdc | 200 Vdc | 400 Vdc |
| Recommended MPPT voltage | 250-500 Vdc | 250-500 Vdc | 250-500 Vdc | 500-750 Vdc |
| Max. output current | 60 A | 60 A | 120 A | 120 A |
| Battery voltage | 48 V nom. (38 - 68 Vdc) | |||
Features and performances
- Reduces Balance of System costs ( Eliminates expensive wiring for parallel strings, saving wires, connectors, junction boxes, fuses, space, time etc.)
- Safe, simple and trouble free connection with SUNCLIXTM (Phoenix Contact "tool free") PV connector.
- Fully protected against wrong wiring
- Simplified safety rules by full isolation between PV and battery and between MPPT inputs
- Any grounding strategy applicable thanks to isolated MPPT inputs. Grounding system fault detection
- Fast precise best in class tracking algorithm brings MPPT efficiency >99%
- World champion for efficiency in isolated converter with >98% conversion efficiency
- 7kW per unit and up to 15 units in parallel: 105kW
- Low self-consumption: <1.2W in night mode
- 4 step charger fully programmable for longer battery life
- 9 LEDs to monitor status and current
- Optimal usage in an Xtender system with a synchronized battery management
- Comprehensive display, programming and data logging with the RCC-02/-03 SUNCLIXTM (Phoenix Contact "tool free") 2 pairs supplied with unit
Properties "Studer VarioString VS-120"
| Betriebstemperatur (°C): | -20° - +55° |
|---|---|
| Eigenverbrauch (mA): | 25 |
| Garantie (Jahre):: | 5 |
| Gewicht (kg): | 7,5 |
| Länge / Breite (Tiefe) / Höhe (mm): | 133 / 322 / 466 |
| Max. Eingangsspannung DC (V): | 900 |
| Maximaler Ausgangsstrom (A): | 2 x 60 |
| Modulstrom (A): | 26 |
| Nenn-Batterie Spannung (V): | 48 |
| Schutzart (IP): | 20 |
Datasheets
Login
Accessory Items
slide 9 to 13 of 9
Studer RCC-03 Remote Control
€261.00*
Studer RCC-03 Remote Control and Programming Centre
The RCC-03 enables the user to supervise the system and to completely adapt it to the needs through the many parameter settings available on the Xtenders, on the VarioTracks and on the VarioStrings.
Thanks to its digital display, the RCC-03 provides clear and comprehensive indications on the state of the system in the chosen language.
The device memorizes the events that occurred on an installation and therefore anticipates any future problems.
A SD card reader is available and allows parameters recording, as well as the uploading of various pre-settings and of all future updates.
Dimension H x L x l: 170 x 168 x 43.5 mm.Supplied with 2 m cable (max. 50m).
Studer Xcom-LAN
€605.00*
Studer Xcom-LAN Internet based communication sets
Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow connecting to sites with GSM mobile coverage or with internet-connection over a local network.
Studer Innotec provides this «plug-and-play» solution using a secure server and a simple and user-friendly interface.
The interface allows for remote interaction with the installation exactly as if on-site with the remote control RCC-02/-03, including: access to all parameters, real-time display of measured data of all devices included in the system and access to the last 30 days of log files.
Furthermore this solution makes it possible to consult the system’s event log at any time. It also allow users to configure alarm messages to be sent to one or more persons by e-mail or SMS. Any loss of internet connection can be indicated.
Xcom-LAN or Xcom-GSM?
Studer Innotec offers two different communication sets for providing access to the installation via internet. The available means of communication at the location of the installation will determine which set to choose.
If the installation has access to internet through a local area network (LAN), choose the Xcom-LAN set. If there is no available connection to the internet but access to a GPRS or 3G mobile network*, choose the Xcom-GSM set.
* the compatibility should always be verified with the mobile phone network operator
Studer ARM-02 Auxiliary relay
€69.00*
Studer Auxiliary relay module ARM-02
Module consisting of 2 auxiliary contacts for the XTS and for the VarioTrack.
Studer BTS 01 Battery Temperature Sensor
€93.00*
Studer BTS-01 Battery Temperature Sensor
This sensor enables to accurately adapt the charge thresholds to the battery temperature.
Studer Xcom-CAN Kommunikationsmodul
€305.00*
Studer Xcom-CAN Kommunikationsmodul
Multi-Protokoll-Kommunikations-Satz für Xtender- und Vario-Systeme
Dieses Tool ermöglicht die Kommunikation zwischen dem BMS, Lithium Batterie Management System, und den Produkten der Familie Xtender/VarioTrack/VarioString. Die Liste mit den zugelassenen Batterien (Hersteller) ist auf Anfrage bei Studer Innotec erhältlich.
Mit der Xcom-CAN ist es auch möglich mit anderen CAN-BUS Geräten (PC, programmierbarer Automat, Mikroprozessor) und allen Xtender/Vario Produkten über ein proprietäres Protokoll zu interagieren. Zum Beispiel kann ein System über ein SCADA gesteuert werden und bietet somit Zugriff auf Systemdaten, Parametereinstellungen und gespeicherte Logdaten.
Studer Xcom-232i Communication module
€315.00*
Studer Communication module Xcom-232i
The communication module Xcom-232i, equiped with a serial port RS-232, enables to be informed of the state of a system consisting of one or several Xtenders, VarioTracks or VarioStrings.
It is then possible to read all data that can be displayed on the remote control basic screen and also to modify the configuration parameters. An Xtender, VarioTrack or VarioString system can therefore be connected to various SCADA control and supervision devices (PC, programmable logic controller, microcontroller).
From a more technical point of view, the electrical interface RS-232 allows for instance the data transmission with GSM modems, RS-232 bridges to TCP/IP or also with long distance converters RS-422. Besides, in order to secure a total electrical separation between the Xtender, VarioTrack or VarioString system and the control and supervision device, the port is protected by means of a galvanic isolation.
The module Xcom-232i is also having a function of data recording and analyzing (Data logger function).
Studer Xcom-GSM
€620.00*
Studer Xcom-GSM Internet based communication sets
Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow connecting to sites with GSM mobile coverage or with internet-connection over a local network.
Studer Innotec provides this «plug-and-play» solution using a secure server and a simple and user-friendly interface.
The interface allows for remote interaction with the installation exactly as if on-site with the remote control RCC-02/-03, including: access to all parameters, real-time display of measured data of all devices included in the system and access to the last 30 days of log files.
Furthermore this solution makes it possible to consult the system’s event log at any time. It also allow users to configure alarm messages to be sent to one or more persons by e-mail or SMS. Any loss of internet connection can be indicated.
Xcom-LAN or Xcom-GSM?
Studer Innotec offers two different communication sets for providing access to the installation via internet. The available means of communication at the location of the installation will determine which set to choose.
If the installation has access to internet through a local area network (LAN), choose the Xcom-LAN set. If there is no available connection to the internet but access to a GPRS or 3G mobile network*, choose the Xcom-GSM set.
* the compatibility should always be verified with the mobile phone network operator
Studer BSP 500 Shunt
€439.00*
Studer Battery Status Processor BSP 500
One of the most important information for a safe and effective operating of an energy system with batteries is their state of charge. The BSP offers, for Xtender, VarioTrack and VarioString systems, a highly precise measuring and an extremely efficient algorithm that calculates the state of charge in the most accurate way.
The remote control RCC-02/03 provides the display, the data logging, the graphical display of the state of charge history and the settings. Values of the BSP can be used in the programming of the Xtender, VarioTrack and VarioString system. Besides, 17 different values can be displayed like for instance:
State of charge
Voltage
Current
Time to go
Throughput energy
Battery temperature
The BSP is offering a voltage measuring for 12, 24 and 48 V batteries and a current measuring by resistive shunt.
Tip
Studer RCC-02 Remote Control
€241.00*
Studer RCC-02 Remote Control and Programming Centre
The RCC-02 enables the user to supervise the system and to completely adapt it to the needs through the many parameter settings available on the Xtenders, on the VarioTracks and on the VarioStrings.
Thanks to its digital display, the RCC-02 provides clear and comprehensive indications on the state of the system in the chosen language.
The device memorizes the events that occurred on an installation and therefore anticipates any future problems.
A SD card reader is available and allows parameters recording, as well as the uploading of various pre-settings and of all future updates.
Meant for wall mounting.Dimension H x L x l: 170 x 168 x 43.5 mm.Supplied with 2 m cable (max. 50m).