Studer Battery Status Processor BSP 1200
One of the most important information for a safe and effective operating of an energy system with batteries is their state of charge. The BSP offers, for Xtender, VarioTrack and VarioString systems, a highly precise measuring and an extremely efficient algorithm that calculates the state of charge in the most accurate way.
The remote control RCC-02/03 provides the display, the data logging, the graphical display of the state of charge history and the settings. Values of the BSP can be used in the programming of the Xtender, VarioTrack and VarioString system. Besides, 17 different values can be displayed like for instance:
State of charge
Voltage
Current
Time to go
Throughput energy
Battery temperature
The BSP is offering a voltage measuring for 12, 24 and 48 V batteries and a current measuring by resistive shunt.
Studer Battery Status Processor BSP 500
One of the most important information for a safe and effective operating of an energy system with batteries is their state of charge. The BSP offers, for Xtender, VarioTrack and VarioString systems, a highly precise measuring and an extremely efficient algorithm that calculates the state of charge in the most accurate way.
The remote control RCC-02/03 provides the display, the data logging, the graphical display of the state of charge history and the settings. Values of the BSP can be used in the programming of the Xtender, VarioTrack and VarioString system. Besides, 17 different values can be displayed like for instance:
State of charge
Voltage
Current
Time to go
Throughput energy
Battery temperature
The BSP is offering a voltage measuring for 12, 24 and 48 V batteries and a current measuring by resistive shunt.
Studer CAB-RJ45 Communication Cable for multi-unit Systems
This communication cable enables Xtenders, VarioTrack and the VarioString to be connected together in order to build multi-unit systems.Several Xtenders, VarioTracks and VarioStrings can therefore be used in the same installation to make either a 3ph system, to increase the power of one phase, or both.Up to 9 Xtenders,15 VarioTracks and 15 VarioStrings can then be combined, offering a power max. of 72 kVA and 75kWp for the VarioTracks and 105kWp for the VarioStrings.
Studer External cooling fan (IP54) ECF-01
The ECF-01 is an external cooling fan (IP54) for the XTS and the VarioTrack series. Using this accessory will increase the power of the inverter. More than this, mounting it after installation is possible at any time.
Studer JT8 Remote Control
The JT8 remote control allows an AJ series inverter to be controlled remotely (ON/OFF). One LED displays the state of the system (ON / Standby / Temporary OFF).
For AJ series inverters from 1.000 to 2.400 VA. Supplied with 5,0m cable.
Studer RCC-01 Remote Control
The RCC-01 remote control allows the user to consult, control and program* the system remotely.A LED display offers a comprehensive view of the batteries charging state and of the output current (or transfer mode input).*Remote control required for the XPC programming.
______________________________________________
Dimensions h x l x w: 135 x 115 x 25 mm.Supplied with 20m cable.Programming possible for the ranges XPC and C in the Compact series.
Studer RCC-02 Remote Control and Programming Centre
The RCC-02 enables the user to supervise the system and to completely adapt it to the needs through the many parameter settings available on the Xtenders, on the VarioTracks and on the VarioStrings.
Thanks to its digital display, the RCC-02 provides clear and comprehensive indications on the state of the system in the chosen language.
The device memorizes the events that occurred on an installation and therefore anticipates any future problems.
A SD card reader is available and allows parameters recording, as well as the uploading of various pre-settings and of all future updates.
Meant for wall mounting.Dimension H x L x l: 170 x 168 x 43.5 mm.Supplied with 2 m cable (max. 50m).
Studer RCC-03 Remote Control and Programming Centre
The RCC-03 enables the user to supervise the system and to completely adapt it to the needs through the many parameter settings available on the Xtenders, on the VarioTracks and on the VarioStrings.
Thanks to its digital display, the RCC-03 provides clear and comprehensive indications on the state of the system in the chosen language.
The device memorizes the events that occurred on an installation and therefore anticipates any future problems.
A SD card reader is available and allows parameters recording, as well as the uploading of various pre-settings and of all future updates.
Dimension H x L x l: 170 x 168 x 43.5 mm.Supplied with 2 m cable (max. 50m).
Studer RCM-10 Remote Control Module
The RCM-10, optional with the XTM series, offers the following functions:
Main on/off of the inverter(Achieved by connecting a potential free contact between terminals 1 and 2)
Function input(Driven by a dry contact between terminals 5 and 6, with a bridge between terminals 3 and 4 or by an AC or DC voltage of max 60 Veff between terminals 4 and 5)
Studer Relays ARM-01
Equipped with 3 programmed relays and a fourth one which is like the inverter/charger's auxiliary contact, this module allows the Solsafe system to be implemented.
Studer X-Connect Multi Xtender System
The pre-wired mounting offers a flexible and cost effective solution for high power systems (up to 63 kVA) based on the XTH inverter/charger.
The frame is supplied with :
Pre-installed DC circuit breakers.
Pre-installed DC fuses.
Pre-installed DIN rails.
Interconnection pipes and gland for auxiliary contact wiring.
Interconnection pipes and gland for AC wiring.
Interconnection pipes and gland + 90 mm2 wire terminated with appropriates ring tongues for DC wiring from Xtender to breakers and fuses.
With screws set for frame assembly.
Studer Communication module Xcom-232i
The communication module Xcom-232i, equiped with a serial port RS-232, enables to be informed of the state of a system consisting of one or several Xtenders, VarioTracks or VarioStrings.
It is then possible to read all data that can be displayed on the remote control basic screen and also to modify the configuration parameters. An Xtender, VarioTrack or VarioString system can therefore be connected to various SCADA control and supervision devices (PC, programmable logic controller, microcontroller).
From a more technical point of view, the electrical interface RS-232 allows for instance the data transmission with GSM modems, RS-232 bridges to TCP/IP or also with long distance converters RS-422. Besides, in order to secure a total electrical separation between the Xtender, VarioTrack or VarioString system and the control and supervision device, the port is protected by means of a galvanic isolation.
The module Xcom-232i is also having a function of data recording and analyzing (Data logger function).
Studer Xcom-CAN Kommunikationsmodul
Multi-Protokoll-Kommunikations-Satz für Xtender- und Vario-Systeme
Dieses Tool ermöglicht die Kommunikation zwischen dem BMS, Lithium Batterie Management System, und den Produkten der Familie Xtender/VarioTrack/VarioString. Die Liste mit den zugelassenen Batterien (Hersteller) ist auf Anfrage bei Studer Innotec erhältlich.
Mit der Xcom-CAN ist es auch möglich mit anderen CAN-BUS Geräten (PC, programmierbarer Automat, Mikroprozessor) und allen Xtender/Vario Produkten über ein proprietäres Protokoll zu interagieren. Zum Beispiel kann ein System über ein SCADA gesteuert werden und bietet somit Zugriff auf Systemdaten, Parametereinstellungen und gespeicherte Logdaten.
Studer Xcom-GSM Internet based communication sets
Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow connecting to sites with GSM mobile coverage or with internet-connection over a local network.
Studer Innotec provides this «plug-and-play» solution using a secure server and a simple and user-friendly interface.
The interface allows for remote interaction with the installation exactly as if on-site with the remote control RCC-02/-03, including: access to all parameters, real-time display of measured data of all devices included in the system and access to the last 30 days of log files.
Furthermore this solution makes it possible to consult the system’s event log at any time. It also allow users to configure alarm messages to be sent to one or more persons by e-mail or SMS. Any loss of internet connection can be indicated.
Xcom-LAN or Xcom-GSM?
Studer Innotec offers two different communication sets for providing access to the installation via internet. The available means of communication at the location of the installation will determine which set to choose.
If the installation has access to internet through a local area network (LAN), choose the Xcom-LAN set. If there is no available connection to the internet but access to a GPRS or 3G mobile network*, choose the Xcom-GSM set.
* the compatibility should always be verified with the mobile phone network operator
Studer Xcom-LAN Internet based communication sets
Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow connecting to sites with GSM mobile coverage or with internet-connection over a local network.
Studer Innotec provides this «plug-and-play» solution using a secure server and a simple and user-friendly interface.
The interface allows for remote interaction with the installation exactly as if on-site with the remote control RCC-02/-03, including: access to all parameters, real-time display of measured data of all devices included in the system and access to the last 30 days of log files.
Furthermore this solution makes it possible to consult the system’s event log at any time. It also allow users to configure alarm messages to be sent to one or more persons by e-mail or SMS. Any loss of internet connection can be indicated.
Xcom-LAN or Xcom-GSM?
Studer Innotec offers two different communication sets for providing access to the installation via internet. The available means of communication at the location of the installation will determine which set to choose.
If the installation has access to internet through a local area network (LAN), choose the Xcom-LAN set. If there is no available connection to the internet but access to a GPRS or 3G mobile network*, choose the Xcom-GSM set.
* the compatibility should always be verified with the mobile phone network operator
Studer Xcom-RS 485i
Durch das Xcom-485i-Modul kann ein Studer Xtender/Vario-System mit einem Fremdgerät (SCADASystem, SPS usw.) über Modbus RTU auf RS-485 interagieren. Die technische Spezifikation dieses
Protokolls ist auf der Website von Studer verfügbar. Mit diesem Protokolls kann das Drittgerät Daten
lesen und schreiben, Nachrichten empfangen und das Xtender/Vario-System vollständig steuern.
€320.90*
Personal Service
Shipping within 24h
30 days money back guarantee
Aftersales Service
Hotline +49 521 91 510 412
This website uses cookies to ensure the best experience possible. More information...
