Personal Service
Shipping within 24h
30 days money back guarantee
Aftersales Service
Hotline +49 521 91 510 412

Studer XTH 6000-48

€5,159.00*

Available, delivery time: 2-5 days

Product number: 030601013
Product information "Studer XTH 6000-48"

Studer Xtender XTH 6000-48

The Xtender series provides an unmatched freedom of use due to its many functions. In a basic application, it offers a total package: the functions of inverter, battery charger, transfer system and assistance to the source. These functions can be combined and controlled in a totally automatic way for exceptional ease and optimal management of available energy.

Its programmable auxiliary contacts also permit interconnection with existing systems or the implementation of extended functions. Fully programmable by means of its remote control, it enables the software update; thus making it an upgradeable product to which new functions may be added further on. Through the implementation of several units, it is possible to create a 3-phase source or to set them in parallel, in order to increase the power available. Up to 9 Xtender series inverters can then be combined together.

All Xtender series devices (except for the XTH 8000-48) are also available in 120Vac /60Hz

Features and Performances

  • True sine wave voltage
  • Reliable and silent with any kind of load
  • Outstanding overload capabilities
  • Smart-Boost function for assistance to the source even with difficult loads
  • Automatic reduction of peak loads (power shaving)
  • Multi-stage programmable battery charger with PFC
  • Stand-by level adjustable over a large range and from a very low threshold
  • Ultra-fast transfer relay
  • Control by digital signal processors (DSP)
  • High efficiency
  • 5 year warranty
Properties "Studer XTH 6000-48"
Ausgangsfrequenz (Hz): 45 - 65
Ausgangsspannung (Vac): (option 120), 230
Betriebstemperatur (°C): -20° - +55°
Cos : 0,1 - 1
Dauerleistung bei 25°C (VA): 5000
Effiktiver Ladestrom, einstellbar (A): 100
Eigenverbrauch: OFF / Stand-By / ON (W): 1,8 / 2,2 / 22
Eingangsspannungsbereich DC (V): 38 - 68
Garantie (Jahre):: 5
Geräuschpegel, ohne /mit Lüfter (dB): < 40 / < 45
Gewicht (kg): 42,0
Lasterkennung (Stand-By) (W): 2 - 25
Leistung 5 Sek. bei 25°C (kVA): 15,0
Leistung 30 Min. bei 25°C (VA): 6000
Länge / Breite (Tiefe) / Höhe (mm): 500 / 300 / 230
Max. Strom über Transfersystem (A): 56
Max. Wirkungsgrad (%): 96
Nominalspannung Batterie (V): 48
Umschaltzeit (ms): < 15

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessory Items

Studer CAB-RJ45 Communication Cable
Studer CAB-RJ45 Communication Cable for multi-unit Systems This communication cable enables Xtenders, VarioTrack and the VarioString to be connected together in order to build multi-unit systems.Several Xtenders, VarioTracks and VarioStrings can therefore be used in the same installation to make either a 3ph system, to increase the power of one phase, or both.Up to 9 Xtenders,15 VarioTracks and 15 VarioStrings can then be combined, offering a power max. of 72 kVA and 75kWp for the VarioTracks and 105kWp for the VarioStrings.

€39.90*
%
Tip
Studer RCC-02 Remote Control
Studer RCC-02 Remote Control and Programming Centre The RCC-02 enables the user to supervise the system and to completely adapt it to the needs through the many parameter  settings available on the Xtenders, on the VarioTracks and on the VarioStrings.     Thanks to its digital display, the RCC-02 provides clear and comprehensive indications on the state of the system in the chosen language. The device memorizes the events that occurred on an installation and therefore anticipates any future problems. A SD card reader is available and allows parameters recording, as well as the uploading of various pre-settings and of all future updates. Meant for wall mounting.Dimension H x L x l: 170 x 168 x 43.5 mm.Supplied with 2 m cable (max. 50m).

€229.90* €239.90* (4.17% saved)
Studer RCC-03 Remote Control
Studer RCC-03 Remote Control and Programming Centre The RCC-03 enables the user to supervise the system and to completely adapt it to the needs through the many parameter  settings available on the Xtenders, on the VarioTracks and on the VarioStrings.   Thanks to its digital display, the RCC-03 provides clear and comprehensive indications on the state of the system in the chosen language. The device memorizes the events that occurred on an installation and therefore anticipates any future problems. A SD card reader is available and allows parameters recording, as well as the uploading of various pre-settings and of all future updates. Dimension H x L x l: 170 x 168 x 43.5 mm.Supplied with 2 m cable (max. 50m).

€249.90*
Studer Xcom-LAN
Studer Xcom-LAN Internet based communication sets Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow connecting to sites with GSM mobile coverage or with internet-connection over a local network.     Studer Innotec provides this «plug-and-play» solution using a secure server and a simple and user-friendly interface.  The interface allows for remote interaction with the installation exactly as if on-site with the remote control RCC-02/-03, including: access to all parameters, real-time display of measured data of all devices included in the system and access to the last 30 days of log files. Furthermore this solution makes it possible to consult the system’s event log at any time. It also allow users to configure alarm messages to be sent to one or more persons by e-mail or SMS. Any loss of internet connection can be indicated.  Xcom-LAN or Xcom-GSM? Studer Innotec offers two different communication sets for providing access to the installation via internet. The available means of communication at the location of the installation will determine which set to choose. If the installation has access to internet through a local area network (LAN), choose the Xcom-LAN set. If there is no available connection to the internet but access to a GPRS or 3G mobile network*, choose the Xcom-GSM set.  * the compatibility should always be verified with the mobile phone network operator

€599.90*
Studer BTS 01 Battery Temperature Sensor
Studer BTS-01 Battery Temperature Sensor This sensor enables to accurately adapt the charge thresholds to the battery temperature.

€59.90*
Studer X-Connect
Studer X-Connect Multi Xtender System The pre-wired mounting offers a flexible and cost effective solution for high power systems (up to 63 kVA) based on the XTH inverter/charger. The frame is supplied with : Pre-installed DC circuit breakers. Pre-installed DC fuses. Pre-installed DIN rails. Interconnection pipes and gland for auxiliary contact wiring. Interconnection pipes and gland for AC wiring. Interconnection pipes and gland + 90 mm2 wire terminated with appropriates ring tongues for DC wiring from Xtender to breakers and fuses. With screws set for frame assembly.

€1,495.00*
Studer Kommunikationsmodul Xcom-CAN
Studer Kommunikationsmodul Xcom-CAN Multi-Protokoll-Kommunikations-Satz für Xtender- und Vario-Systeme Dieses Tool ermöglicht die Kommunikation zwischen dem BMS, Lithium Batterie Management System, und den Produkten der Familie Xtender/VarioTrack/VarioString. Die Liste mit den zugelassenen Batterien (Hersteller) ist auf Anfrage bei Studer Innotec erhältlich. Mit der Xcom-CAN ist es auch möglich mit anderen CAN-BUS Geräten (PC, programmierbarer Automat, Mikroprozessor) und allen Xtender/Vario Produkten über ein proprietäres Protokoll zu interagieren. Zum Beispiel kann ein System über ein SCADA gesteuert werden und bietet somit Zugriff auf Systemdaten, Parametereinstellungen und gespeicherte Logdaten.

€299.90*
Studer Xcom-232i Communication module
Studer Communication module Xcom-232i The communication module Xcom-232i, equiped with a serial port RS-232, enables to be informed of the state of a system consisting of one or several Xtenders, VarioTracks or VarioStrings. It is then possible to read all data that can be displayed on the remote control basic screen and also to modify the configuration parameters. An Xtender, VarioTrack or VarioString system can therefore be connected to various SCADA control and supervision devices (PC, programmable logic controller, microcontroller). From a more technical point of view, the electrical interface RS-232 allows for instance the data transmission with GSM modems, RS-232 bridges to TCP/IP or also with long distance converters RS-422. Besides, in order to secure a total electrical separation between the Xtender, VarioTrack or VarioString system and the control and supervision device, the port is protected by means of a galvanic isolation. The module Xcom-232i is also having a function of data recording and analyzing (Data logger function).

€299.90*
Studer Xcom-GSM
Studer Xcom-GSM Internet based communication sets Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow connecting to sites with GSM mobile coverage or with internet-connection over a local network.     Studer Innotec provides this «plug-and-play» solution using a secure server and a simple and user-friendly interface.  The interface allows for remote interaction with the installation exactly as if on-site with the remote control RCC-02/-03, including: access to all parameters, real-time display of measured data of all devices included in the system and access to the last 30 days of log files. Furthermore this solution makes it possible to consult the system’s event log at any time. It also allow users to configure alarm messages to be sent to one or more persons by e-mail or SMS. Any loss of internet connection can be indicated.  Xcom-LAN or Xcom-GSM? Studer Innotec offers two different communication sets for providing access to the installation via internet. The available means of communication at the location of the installation will determine which set to choose. If the installation has access to internet through a local area network (LAN), choose the Xcom-LAN set. If there is no available connection to the internet but access to a GPRS or 3G mobile network*, choose the Xcom-GSM set.  * the compatibility should always be verified with the mobile phone network operator

€599.90*