Personal Service
Shipping within 24h
30 days money back guarantee
Aftersales Service
Hotline +49 521 91 510 412

Studer Vario Track VT-40

€839.00*

Available, delivery time: 2-5 days

Product number: 030404001
Product information "Studer Vario Track VT-40"

Studer Vario Track VT-40

Fully configurable and developed to meet the highest industry standards, the MPPT solar charge controller VarioTrack ensures maximal efficiency in retrieving energy from any PV system. When connected to solar panels and batteries, the solar charge controller VarioTrack automatically charges the batteries in an optimal way with all the available solar power using its algorithm for Maximum Power Point Tracking (MPPT). The MPPT continuously seeks out the solar generator's optimal voltage to retrieve the maximum available energy. This operating point varies constantly depending on outdoor conditions (sunlight, temperature...) to which it must adapt.


Features and performances
 

  • Ensures an optimal energy production
  • Tracking efficiency: >99%
  • Conversion efficiency: >99%
  • 4 step charger for longer battery life
  • 8 predefined battery charge curves as standard
  • Free programming of the battery's load curve with the RCC-02/-03
  • Low self-consumption: <1W in night mode
  • Protection against incorrect wiring
  • Protection against reverse polarity
  • Fully configurable
  • IP54 enclosure
  • Comprehensive display, programming and data logging with the RCC-02/-03
  • Up to 15 VarioTrack in parallel on the same communication bus
  • Compatible with all PV systems
  • Optimal usage in an Xtender system with a synchronized battery management
Properties "Studer Vario Track VT-40"
Betriebstemperatur (°C): -20° - +55°
Garantie (Jahre):: 5
Gewicht (kg): 3,80
Länge / Breite (Tiefe) / Höhe (mm): 120 / 220 / 310
Max. Eingangsspannung DC (V): 150
Max. PV Leistung nach Batteriespannung: 12V @ 625 W; 24V @ 1250 W; 48V @ 2500 W
Maximaler Ausgangsstrom (A): 40
Nenn-Batterie Spannung (V): 12 / 24 / 48
Schutzart (IP): 54

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessory Items

Studer ECF-01 external cooling fan
Studer External cooling fan (IP54) ECF-01 The ECF-01 is an external cooling fan (IP54) for the XTS and the VarioTrack series. Using this accessory will increase the power of the inverter. More than this, mounting it after installation is possible at any time.  

€119.90*
Studer BSP 500 Shunt
Studer Battery Status Processor BSP 500 One of the most important information for a safe and effective operating of an energy system with batteries is their state of charge. The BSP offers, for Xtender, VarioTrack and VarioString systems, a highly precise measuring and an extremely efficient algorithm that calculates the state of charge in the most accurate way. The remote control RCC-02/03 provides the display, the data logging, the graphical display of the state of charge history and the settings. Values of the BSP can be used in the programming of the Xtender, VarioTrack and VarioString system. Besides, 17 different values can be displayed like for instance: State of charge Voltage Current Time to go Throughput energy Battery temperature       The BSP is offering a voltage measuring for 12, 24 and 48 V batteries and a current measuring by resistive shunt.

€429.90*
%
Tip
Studer RCC-02 Remote Control
Studer RCC-02 Remote Control and Programming Centre The RCC-02 enables the user to supervise the system and to completely adapt it to the needs through the many parameter  settings available on the Xtenders, on the VarioTracks and on the VarioStrings.     Thanks to its digital display, the RCC-02 provides clear and comprehensive indications on the state of the system in the chosen language. The device memorizes the events that occurred on an installation and therefore anticipates any future problems. A SD card reader is available and allows parameters recording, as well as the uploading of various pre-settings and of all future updates. Meant for wall mounting.Dimension H x L x l: 170 x 168 x 43.5 mm.Supplied with 2 m cable (max. 50m).

€229.90* €239.90* (4.17% saved)
Studer RCC-03 Remote Control
Studer RCC-03 Remote Control and Programming Centre The RCC-03 enables the user to supervise the system and to completely adapt it to the needs through the many parameter  settings available on the Xtenders, on the VarioTracks and on the VarioStrings.   Thanks to its digital display, the RCC-03 provides clear and comprehensive indications on the state of the system in the chosen language. The device memorizes the events that occurred on an installation and therefore anticipates any future problems. A SD card reader is available and allows parameters recording, as well as the uploading of various pre-settings and of all future updates. Dimension H x L x l: 170 x 168 x 43.5 mm.Supplied with 2 m cable (max. 50m).

€249.90*
Studer Xcom-LAN
Studer Xcom-LAN Internet based communication sets Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow connecting to sites with GSM mobile coverage or with internet-connection over a local network.     Studer Innotec provides this «plug-and-play» solution using a secure server and a simple and user-friendly interface.  The interface allows for remote interaction with the installation exactly as if on-site with the remote control RCC-02/-03, including: access to all parameters, real-time display of measured data of all devices included in the system and access to the last 30 days of log files. Furthermore this solution makes it possible to consult the system’s event log at any time. It also allow users to configure alarm messages to be sent to one or more persons by e-mail or SMS. Any loss of internet connection can be indicated.  Xcom-LAN or Xcom-GSM? Studer Innotec offers two different communication sets for providing access to the installation via internet. The available means of communication at the location of the installation will determine which set to choose. If the installation has access to internet through a local area network (LAN), choose the Xcom-LAN set. If there is no available connection to the internet but access to a GPRS or 3G mobile network*, choose the Xcom-GSM set.  * the compatibility should always be verified with the mobile phone network operator

€599.90*
Studer ARM-02 Auxiliary relay
Studer Auxiliary relay module ARM-02 Module consisting of 2 auxiliary contacts for the XTS and for the VarioTrack.

€79.90*
Studer BTS 01 Battery Temperature Sensor
Studer BTS-01 Battery Temperature Sensor This sensor enables to accurately adapt the charge thresholds to the battery temperature.

€59.90*
Studer Xcom-CAN Kommunikationsmodul
Studer Xcom-CAN Kommunikationsmodul Multi-Protokoll-Kommunikations-Satz für Xtender- und Vario-Systeme Dieses Tool ermöglicht die Kommunikation zwischen dem BMS, Lithium Batterie Management System, und den Produkten der Familie Xtender/VarioTrack/VarioString. Die Liste mit den zugelassenen Batterien (Hersteller) ist auf Anfrage bei Studer Innotec erhältlich. Mit der Xcom-CAN ist es auch möglich mit anderen CAN-BUS Geräten (PC, programmierbarer Automat, Mikroprozessor) und allen Xtender/Vario Produkten über ein proprietäres Protokoll zu interagieren. Zum Beispiel kann ein System über ein SCADA gesteuert werden und bietet somit Zugriff auf Systemdaten, Parametereinstellungen und gespeicherte Logdaten.

€299.90*
Studer Xcom-232i Communication module
Studer Communication module Xcom-232i The communication module Xcom-232i, equiped with a serial port RS-232, enables to be informed of the state of a system consisting of one or several Xtenders, VarioTracks or VarioStrings. It is then possible to read all data that can be displayed on the remote control basic screen and also to modify the configuration parameters. An Xtender, VarioTrack or VarioString system can therefore be connected to various SCADA control and supervision devices (PC, programmable logic controller, microcontroller). From a more technical point of view, the electrical interface RS-232 allows for instance the data transmission with GSM modems, RS-232 bridges to TCP/IP or also with long distance converters RS-422. Besides, in order to secure a total electrical separation between the Xtender, VarioTrack or VarioString system and the control and supervision device, the port is protected by means of a galvanic isolation. The module Xcom-232i is also having a function of data recording and analyzing (Data logger function).

€299.90*
Studer Xcom-GSM
Studer Xcom-GSM Internet based communication sets Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow connecting to sites with GSM mobile coverage or with internet-connection over a local network.     Studer Innotec provides this «plug-and-play» solution using a secure server and a simple and user-friendly interface.  The interface allows for remote interaction with the installation exactly as if on-site with the remote control RCC-02/-03, including: access to all parameters, real-time display of measured data of all devices included in the system and access to the last 30 days of log files. Furthermore this solution makes it possible to consult the system’s event log at any time. It also allow users to configure alarm messages to be sent to one or more persons by e-mail or SMS. Any loss of internet connection can be indicated.  Xcom-LAN or Xcom-GSM? Studer Innotec offers two different communication sets for providing access to the installation via internet. The available means of communication at the location of the installation will determine which set to choose. If the installation has access to internet through a local area network (LAN), choose the Xcom-LAN set. If there is no available connection to the internet but access to a GPRS or 3G mobile network*, choose the Xcom-GSM set.  * the compatibility should always be verified with the mobile phone network operator

€599.90*