Top seller
No results were found for the filter!
Hint!
Studer RCC-02 Remote Control and Programming Centre The RCC-02 enables the user to supervise the system and to completely adapt it to the needs through the many parameter settings available on the Xtenders, on the VarioTracks and on the...
€229.90 * €239.90 *
Studer External cooling fan (IP54) ECF-01 The ECF-01 is an external cooling fan (IP54) for the XTS and the VarioTrack series. Using this accessory will increase the power of the inverter. More than this, mounting it after installation is...
€119.90 *
Studer Auxiliary relay module ARM-02 Module consisting of 2 auxiliary contacts for the XTS and for the VarioTrack.
€79.90 *
Hint!
HIS Batteriekabel 50mm², 2,50 m Batterie Anschluss-Set für Wechselrichter und Speicher. Z. B. SMA und LG Lieferumfang: 2 Kabel NSGAFÖU 1.8/3kV 1x50,0 mm² schwarz á 2.500mm Länge A-Seite Rohrkabelschuh mit schmalem Flansch für M8 - 50...
€99.90 *
Studer RCC-03 Remote Control and Programming Centre The RCC-03 enables the user to supervise the system and to completely adapt it to the needs through the many parameter settings available on the Xtenders, on the VarioTracks and on the...
€249.90 *
Studer Communication module Xcom-232i The communication module Xcom-232i, equiped with a serial port RS-232, enables to be informed of the state of a system consisting of one or several Xtenders, VarioTracks or VarioStrings. It is then...
€299.90 *
Studer Xcom-LAN Internet based communication sets Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow...
€599.90 *
Studer Xcom-GSM Internet based communication sets Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow...
€597.90 *
Studer RCM-10 Remote Control Module The RCM-10, optional with the XTM series, offers the following functions: Main on/off of the inverter (Achieved by connecting a potential free contact between terminals 1 and 2) Function input (Driven...
€59.90 *
Studer Battery Status Processor BSP 500 One of the most important information for a safe and effective operating of an energy system with batteries is their state of charge. The BSP offers, for Xtender, VarioTrack and VarioString...
€419.90 *
Studer Battery Status Processor BSP 1200 One of the most important information for a safe and effective operating of an energy system with batteries is their state of charge. The BSP offers, for Xtender, VarioTrack and VarioString...
€449.90 *
Studer BTS-01 Battery Temperature Sensor This sensor enables to accurately adapt the charge thresholds to the battery temperature.
€54.90 *
Viewed