No results were found for the filter!
Studer RCC-01 Remote Control
Studer RCC-01 Remote Control The RCC-01 remote control allows the user to consult, control and program* the system remotely.A LED display offers a comprehensive view of the batteries charging state and of the output current (or transfer...
Studer Relais ARM-01
Studer Relays ARM-01 Equipped with 3 programmed relays and a fourth one which is like the inverter/charger's auxiliary contact, this module allows the Solsafe system to be implemented.
Studer Cover CFC-01 The cover CFC-01 offers an additional coonection protection by means of glands.
Studer Cover C-IP22 The C-IP22 cover increases inverter protection against intrusions and splattering; from IP20 to IP22.
Studer CT35 Sensor
Studer CT-35 Sensor The CT-35 temperature sensor adapts charge levels to the battery's temperature variations. Supplied with 3,0 m cable.
Studer JT8 Remote Control
Studer JT8 Remote Control The JT8 remote control allows an AJ series inverter to be controlled remotely (ON/OFF). One LED displays the state of the system (ON / Standby / Temporary OFF). For AJ series inverters from 1.000 to 2.400 VA....
Studer X-Connect Multi Xtender System The pre-wired mounting offers a flexible and cost effective solution for high power systems (up to 63 kVA) based on the XTH inverter/charger. The frame is supplied with : Pre-installed DC circuit...
Studer BTS 01 Battery Temperature Sensor
Studer BTS-01 Battery Temperature Sensor This sensor enables to accurately adapt the charge thresholds to the battery temperature.
Studer CAB-RJ45 Communication Cable
Studer CAB-RJ45 Communication Cable for multi-unit Systems This communication cable enables Xtenders, VarioTrack and the VarioString to be connected together in order to build multi-unit systems. Several Xtenders, VarioTracks and...
Studer ECF-01 external cooling fan
Studer External cooling fan (IP54) ECF-01 The ECF-01 is an external cooling fan (IP54) for the XTS and the VarioTrack series. Using this accessory will increase the power of the inverter. More than this, mounting it after installation is...
Studer RCM-10 Remote Control Module
Studer RCM-10 Remote Control Module The RCM-10, optional with the XTM series, offers the following functions: Main on/off of the inverter (Achieved by connecting a potential free contact between terminals 1 and 2) Function input (Driven...
Studer RCC-03 Remote Control
Studer RCC-03 Remote Control and Programming Centre The RCC-03 enables the user to supervise the system and to completely adapt it to the needs through the many parameter settings available on the Xtenders, on the VarioTracks and on the...
€184.90 * €199.00 *